Octagon Banner Arm

These banner arms are designed for octagon lamp standards. Tip: Sew sleeve ends of banner with grommets on inside header.

Height from Bottom

Single Octagon Banner Arm Connector

Double Octagon Banner Arm Connector

Banner Arms

Flex Banner Arm

Steel Banner Arm

Aluminum Banner Arm (Octagon)

Flexible Arms

Flexible arms are ¾” diameter and designed to spill off the wind, this produces less stress on hardware and banner.

Flexible arm should not be used with vinyl material.

Flexible arms work best with nylon and polyester material, when using vinyl material use flexible arm only for the bottom arm.

Fixed Arms

Fixed arms are made of 1.3″ steel or 1.5″ aluminum.

Aluminum will not stain walls, but steel has twice the strength of aluminum.

The steel is powder coated black or white, other colours are available at an extra charge.

Aluminum or Steel Chain Banner Brackets

Arms sold separately

Chain Banner Brackets fit a variety of pole diameters and shapes; the bracket is slotted allowing the stainless steel chain to be adjusted.

The minimum diameter pole is 3.5″ and the maximum is 14″.

Aluminum arms do not require powder coating; add $15 to powder coat aluminum.


Steel arms come powder coated; standard colours are black, white, grey, green.

Banner Arms

Aluminum Banner Arm

Steel Banner Arm

Aluminum Chain Banner Bracket Connector

Steel Chain Banner Bracket Connector

Contacts

For any inquiries please email